Route 50, October 16, 2025
The ongoing construction of the R-Cut intersection along Route 50 is nearing completion, with significant improvements expected in traffic flow and safety for drivers in the region. This development aims to reduce congestion and enhance overall travel experiences for commuters. As the project wraps up, local authorities encourage motorists to remain cautious in the area until the construction is officially finished.
Coolville, Ohio: R-Cut Intersection on Route 50 Nears Completion
Coolville, Ohio – Construction on the R-Cut intersection along Route 50 in Coolville is nearing completion, promising improved traffic flow and enhanced safety for drivers in the region. The Ohio Department of Transportation (ODOT) initiated the project in June 2025, aiming to transform the existing two-way stop intersection at Brimstone Road into a Reduced Conflict U-Turn (R-Cut) design. This modification is expected to reduce the number of vehicle accidents at the intersection, which has historically been higher than average compared to other locations across the district. The R-Cut design has been proven to decrease collision points by up to 50%, thereby enhancing overall road safety. The project is anticipated to conclude in late November 2025.
Project Details
The R-Cut design prohibits left turns and straight-through movements from Brimstone Road onto Route 50. Instead, drivers are directed to make a right turn onto Route 50 and then perform a U-turn at a designated crossover point. This approach aims to reduce the number of accidents caused by left turns and straight crossings, which have been prevalent at this intersection. The project also includes the installation of lighting, drainage systems, signs, and pavement markings to further enhance safety and traffic flow.
Background
Between 2019 and 2023, the intersection of Route 50 and Brimstone Road experienced 18 crashes, primarily due to vehicles attempting left turns or crossing straight through the intersection from Brimstone Road onto Route 50. In response to these safety concerns, ODOT decided to implement the R-Cut design, which has been recognized by the Federal Highway Administration as an effective safety measure. The project is part of ODOT’s ongoing efforts to improve road safety and reduce accident rates across the state.
Impact on Local Community
Local residents and drivers have expressed mixed reactions to the R-Cut design. While some appreciate the potential safety benefits, others have raised concerns about the changes to traffic patterns and the learning curve associated with the new intersection design. ODOT has been actively engaging with the community to address these concerns and provide information on how to navigate the new intersection safely.
Conclusion
The nearing completion of the R-Cut intersection along Route 50 in Coolville represents a significant step toward enhancing road safety and improving traffic flow in the area. As the project concludes in late November 2025, drivers are encouraged to familiarize themselves with the new traffic patterns to ensure a smooth transition and continued safety on the road.
FAQ
What is an R-Cut intersection?
An R-Cut intersection is a design that prohibits left turns and straight-through movements from a side road onto a main road. Instead, drivers make a right turn onto the main road and then perform a U-turn at a designated crossover point. This design aims to reduce conflict points and improve safety by decreasing the number of accidents caused by left turns and straight crossings.
Why was the R-Cut design implemented at this intersection?
The R-Cut design was implemented at the intersection of Route 50 and Brimstone Road due to a higher-than-average number of vehicle accidents compared to other locations across the district. Between 2019 and 2023, the intersection experienced 18 crashes, primarily caused by vehicles attempting left turns or straight crossings from Brimstone Road onto Route 50. The R-Cut design aims to reduce these types of accidents and enhance overall road safety.
When is the R-Cut intersection project expected to be completed?
The R-Cut intersection project along Route 50 in Coolville is anticipated to conclude in late November 2025.
How can drivers navigate the new R-Cut intersection safely?
Drivers should familiarize themselves with the new traffic patterns at the R-Cut intersection. Instead of making left turns or going straight through the intersection from Brimstone Road onto Route 50, drivers should make a right turn onto Route 50 and then perform a U-turn at the designated crossover point. ODOT has been actively engaging with the community to provide information and address concerns about the new intersection design.
Key Features of the R-Cut Intersection Project
| Feature | Description |
|---|---|
| Project Start Date | June 2025 |
| Project Completion Date | Late November 2025 |
| Location | Intersection of Route 50 and Brimstone Road, Coolville, Ohio |
| Project Cost | Approximately $3.2 million |
| Safety Measure | Implementation of R-Cut intersection design to reduce accidents |
| Additional Improvements | Installation of lighting, drainage systems, signs, and pavement markings |
Deeper Dive: News & Info About This Topic
HERE Resources
Author: Construction FL News
The OHIO STAFF WRITER represents the experienced team at constructionohnews.com, your go-to source for actionable local news and information in Ohio and beyond. Specializing in "news you can use," we cover essential topics like product reviews for personal and business needs, local business directories, politics, real estate trends, neighborhood insights, and state news affecting the area—with deep expertise drawn from years of dedicated reporting and strong community input, including local press releases and business updates. We deliver top reporting on high-value events such as the Ohio Construction Conference, major infrastructure projects, and advancements in construction technology showcases. Our coverage extends to key organizations like the Associated Builders and Contractors of Ohio and the Ohio Home Builders Association, plus leading businesses in construction and legal services that power the local economy such as CMiC Global and Vorys, Sater, Seymour and Pease LLP. As part of the broader network, including constructioncanews.com, constructionnynews.com, and constructiontxnews.com, we provide comprehensive, credible insights into the dynamic construction landscape across multiple states.
